tmd710-tncsetup¶
Configures the built-in TNC on Kenwood TM-D710 and TH-D72 radios
- Version recorded: 1.13.1
- Categories:
radio-programming,soundcard-modems - Upstream: https://github.com/fmarier/tmd710_tncsetup
What it does¶
Sends the setup commands a Kenwood TM-D710, TM-D710G or TH-D72 needs before its internal TNC will work with an APRS program: callsign, beacon settings, path, and the KISS-mode switch that hands the TNC over to the computer.
Why you would want it¶
These radios have a real TNC inside them, which is a considerable convenience -- no sound card, no interface, no level adjustment. Getting it into the right mode from the front panel is a menu safari, and this does it in one command, repeatably, which matters when you are setting up in the field.
Before it will work¶
One of the supported Kenwood radios and its data cable, with access to the serial device.
How it installs¶
- apt:
tmd710-tncsetup
Known problems¶
It is specific to these models and will not usefully talk to anything else. The radio's own APRS functions and computer control of the TNC are mutually exclusive modes; switching to KISS turns off the radio's internal APRS display, which surprises people who wanted both.
Keeping it current¶
- probe: apt policy
- strategy: apt_upgrade
Where to get help with the software itself¶
Francois Marier, VA7GPL. GitHub issues at the URL above.